|
|
Home >
Mobile Computing > ProClip USA
|
|
|
|
|
Showing: 61 - 90 of 459 Items
|
Total Page(s): 16
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Description |
Price
(USD)
|
Availability
|
|
ProClip USA
ProClip Magnetic 6.5" Pedestal Mount
Magnetic Universal Pedestal Mount 6.5 Inch Mount Arm with AMPS Plate Magnetic Mount 3.45 Inch (88mm)
SKU: PRO-202030 Mfgr Part#: 202030
|
|
|
ProClip USA
Zebra MC93 4 Slot Desktop Charge Dock
4 Slot Desktop Charging Dock Zebra MC9300
SKU: PRO-241821 Mfgr Part#: 241821
|
|
|
ProClip USA
LARGE UNIVERSAL HOLDER FOR TABLET W/CASE
ProClip Large Universal Tablet Holder for use with a case. Fits most 10 - 12 inch tablets with a protective case like the OtterBox - Easily slide device in and out of holder with spring action corner - Includes Tilt-Swivel to angle holder 15 degrees any direction - Width adjustment 226 - 309 mm (8.9 - 12.1 inches) - Height adjustment 151 - 226 mm (5.9 - 8.9 inches)
SKU: PRO-511627 Mfgr Part#: 511627
|
|
|
|
ProClip USA
Heavy Duty Swivel Mount M4 Round Bases
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 4MM Slots (Fits M4 Fasteners)
SKU: PRO-216160 Mfgr Part#: 216160
|
|
|
ProClip USA
ZEB TC70/72/75/77 CHG TOP-SUPRT HARDWIRE
Top Support Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Charging cable permanently attached to cradle - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
SKU: PRO-531707 Mfgr Part#: 531707
|
|
|
|
ProClip USA
ZEB ET50/55 8.3 FRAME XBACK CRADLE
Cradle for ET5X 8.3, Frame, X-Back without Scanner. Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Accommodates Expansion Back modules with scanners and batteries (Can not scan while docked).
SKU: PRO-511893 Mfgr Part#: 511893
|
|
|
|
ProClip USA
ProClip Folding Keyboard & Tablet Mount
Folding Keyboard and Tablet Mount AMPS, VESA 75/100, Keyboard Support Tension Hinge, Offset Mount Points
SKU: PRO-216261 Mfgr Part#: 216261
|
|
|
|
ProClip USA
QUICK CLAMP MOUNT W/ QUICK RELEASE DOCK
QUICK CLAMP MOUNT WITH QUICK RELEASE DOCK
SKU: PRO-100176 Mfgr Part#: 100176
|
|
|
ProClip USA
AC Power Supply, 5' Cable, 100-240V
AC Power Supply, 5 Cable, 100-240V, 1.3A Input, 12V, 3.0A Output, Int l Adapters Included
SKU: PRO-216249 Mfgr Part#: 216249
|
|
|
|
ProClip USA
MOUNT HD 4 INCH - RND TO SQUARE
This aluminum 4 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round and square AMPS base and top.
SKU: PRO-215837 Mfgr Part#: 215837
|
|
|
|
ProClip USA
ET4x Cradle, SL, USB, CLA, Boot, X-Back
Charging Cradle, Spring Lock, USB-A Host, Cigarette Lighter Adapter Zebra ET40/ET45 10" (with Rugged Boot) Supports Expansion Back
SKU: PRO-746333 Mfgr Part#: 746333
|
|
|
ProClip USA
DASH MOUNT INTERNATIONAL TRUCKS
DASH MOUNT INTERNATIONAL FOR TRUCKS 2002 - 2018. ONLY for the Center Flat Panel Dashboard.
SKU: PRO-853943 Mfgr Part#: 853943
|
|
|
|
ProClip USA
UNIVERSAL TABLET HOLDER LARGE
This Large universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit large tablets that are 180 - 230 mm (7.09 - 9.06 inches) in width.
SKU: PRO-511850 Mfgr Part#: 511850
|
|
|
|
ProClip USA
ModTek USB-C Dock for Android/Windows
ModTek USB-C 3.1 Dock for Android and Windows Devices
SKU: PRO-216410 Mfgr Part#: 216410
|
|
|
ProClip USA
NC/NR ZEB TC70/72/75/77 CHARGE HARDWIRED
Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
SKU: PRO-513707 Mfgr Part#: 513707
|
|
|
|
ProClip USA
MOUNT HD 8 INCH ROUND BASE
This aluminum 8 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
SKU: PRO-215864 Mfgr Part#: 215864
|
|
|
|
ProClip USA
Quick Release Dock Fastener Pack
Quick Release Dock Fastener Pack
SKU: PRO-100137 Mfgr Part#: 100137
|
|
|
|
ProClip USA
MOUNT HD 6 INCH - RND TO SQUARE
This aluminum 6 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
SKU: PRO-215838 Mfgr Part#: 215838
|
|
|
|
ProClip USA
MOUNT HD 6 INCH ROUND BASE
This aluminum 6 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round AMPS base and top.
SKU: PRO-215863 Mfgr Part#: 215863
|
|
|
|
ProClip USA
HW Charge Holder Samsung Tab Active4 Pro
Charging Holder, Tilt-Swivel, Key Lock and Hard-Wired Power Supply Samsung Galaxy Tab Active4 Pro
SKU: PRO-736328 Mfgr Part#: 736328
|
|
|
|
ProClip USA
ET4x Cradle, HW, Boot
Charging Cradle, Hard-Wired Power Supply Zebra ET40/ET45 8" (with Rugged Boot)
SKU: PRO-713318 Mfgr Part#: 713318
|
|
|
|
ProClip USA
ZEBRA ET50/55 8.3 CRADLE
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
SKU: PRO-510880 Mfgr Part#: 510880
|
|
|
|
ProClip USA
ET4x - Spring Lock Module, No Boot
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
SKU: PRO-216313 Mfgr Part#: 216313
|
|
|
ProClip USA
HEAVYDUTY CLAMP MOUNT 3.375 x 5.125
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
SKU: PRO-215677 Mfgr Part#: 215677
|
|
|
|
ProClip USA
USB-C Charge Cradle Honeywell CT30 XP
Charging Cradle - USB-C with Dual-USB Hard-Wired Power Supply Honeywell CT30 XP with Protective Boot
SKU: PRO-727335 Mfgr Part#: 727335
|
|
|
|
ProClip USA
ET4x Cradle, Hard-Wired, Boot, X-Back
Charging Cradle, Hard-Wired Power Supply Zebra ET40/ET45 8" (with Rugged Boot) Supports Expansion Back
SKU: PRO-713330 Mfgr Part#: 713330
|
|
|
|
ProClip USA
Hino 200/300 Angled Commercial Platform
Hino 200/300 Angled Mount - Commercial Mounting Platform, strong enough to hold a device in the Tough Sleeve.The mount attaches to the upper center right of the center dash. Device Holder NOT included, sold separately.Comes with a pre-drilled hole pattern for device attachment. A device holder can easily be attached anywhere on the face plate. Compatibel with: Hino 200-Series 2005 - 2020, Hino 300-Series 2005 - 2020
SKU: PRO-213528 Mfgr Part#: 213528
|
|
|
|
ProClip USA
ET4x Cradle, SL, CLA
Charging Cradle, Spring Lock, Cigarette Lighter Adapter Zebra ET40/ET45 10" (Bare Tablet)
SKU: PRO-746319 Mfgr Part#: 746319
|
|
|
|
ProClip USA
Steel AMPS Adapt Plate for Zeb VC80/80x
Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
SKU: PRO-100142 Mfgr Part#: 100142
|
|
|
|
ProClip USA
Dual Port USB Cig-Plug Adapter
Dual Port USB Cig-Plug Adapter USB Port 1 Output: 4.9V ~ 5.25V, 2.4A (12 Watts Max) USB Port 2 Output: (3.6V ~ 6V 3A) (6.2 ~ 9V 2A) (9.2 ~ 12V 1.5A) Quickcharge 3.0 Compatible (18 Watts Max)
SKU: PRO-945010 Mfgr Part#: 945010
|
|
|
|
|
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Showing: 61 - 90 of 459 Items
|
Total Page(s): 16
|
|
Home >
Mobile Computing > ProClip USA
|
Office Computers, All-in-One Terminals, Touch Screen Computers Desktop, Office Systems
|
|
