|
Description |
Price
(USD)
|
Availability
|
|
ProClip USA
ProClip Toyota Prius 2016-20xx
PROCLIP CENTER MOUNT - Toyota Prius 2016 - 20xx
SKU: PRO-855200 Mfgr Part#: 855200
|
|
|
|
ProClip USA
ProClip Center Mount Ford Transit 2020+
PROCLIP CENTER MOUNT - Ford Transit 2020 - 20xx Ford Tourneo Custom 2019 - 20xx
SKU: PRO-855404 Mfgr Part#: 855404
|
|
|
ProClip USA
Aluminum AMPS Plate for Crown Pipe Clamp
Aluminum AMPS Adapter Plate for Crown Forklift Pipe Mount
SKU: PRO-241798 Mfgr Part#: 241798
|
|
|
|
ProClip USA
UNIVERSAL PEDESTAL 6 INCH
This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 6.5 inches/ 165 mm and can be attached to any flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
SKU: PRO-202010 Mfgr Part#: 202010
|
|
|
|
ProClip USA
Short Extension Plate
Short Extension Plate
SKU: PRO-216076 Mfgr Part#: 216076
|
|
|
|
ProClip USA
CLAMP MOUNTw/PLATE
For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits round and oblong bars 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)
SKU: PRO-215794 Mfgr Part#: 215794
|
|
|
ProClip USA
ProClip Non-Charge Cradle Zebra TC21/26
Non-Charging Cradle Zebra TC21 TC26 in Rugged Boot
SKU: PRO-711338 Mfgr Part#: 711338
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 6IN
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215762 Mfgr Part#: 215762
|
|
|
ProClip USA
ProClip Wall Power Supply 12V Molex
AC Wall Power Supply with 6-Pin Molex Adapter 110-240V 1.3A AC Input 12V 3A DC Output Interchangeable Wall Plugs 5 Foot Cable
SKU: PRO-216353 Mfgr Part#: 216353
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY SQUARE BASE
This Square AMPS Base adds a mounting platform to a Mount Extension Rod. It offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
SKU: PRO-215850 Mfgr Part#: 215850
|
|
|
|
ProClip USA
ProClip Power Supply, Cabling and Fuse
HARDWIRE POWER SUPPLY 24/12V TO 5V, 2A (IP841 charging box with Molex to Molex Pig Tail and 2 Pin Molex cable to fixed power source with red fuse holder)
SKU: PRO-241463 Mfgr Part#: 241463
|
|
|
|
ProClip USA
Non-Charging Cradle Zebra TC73 / TC78
Non-Charging Cradle Zebra TC73 / TC78
SKU: PRO-711311 Mfgr Part#: 711311
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY ROUND BASE 5MM
This Round base Mount AMPS Base adds a mounting platform to a Mount Extension Rod. It has holes which accomodate 5mm bolts and offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
SKU: PRO-215849 Mfgr Part#: 215849
|
|
|
|
ProClip USA
ET4x - Spring Lock Module, No Boot
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
SKU: PRO-216313 Mfgr Part#: 216313
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 4 INCH
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215846 Mfgr Part#: 215846
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 8 INCH
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215847 Mfgr Part#: 215847
|
|
|
|
ProClip USA
ProClip AMPS & VESA75 Vibration Damper
VESA 75 and AMPS Vibration Damper M4 Threaded Mount Holes Reduces Vibration and Shock Silicone Rubber - 60 Shore Firmness Include M4 Fastner Pack (100223)
SKU: PRO-216275 Mfgr Part#: 216275
|
|
|
|
ProClip USA
Magnet Set (2) for ProClip Tough Sleeve
Magnet Set (2 pcs) for attachment to back of Sleeve.
SKU: PRO-710880 Mfgr Part#: 710880
|
|
|
|
ProClip USA
5" Pedestal Mount with Steel AMPS Plates
5 Inch Universal Pedestal Mount Includes 2 Steel 20mm Ball AMPS Plates
SKU: PRO-100326 Mfgr Part#: 100326
|
|
|
|
ProClip USA
Non-Charging Cradle Honeywell CT30 XP
Non-Charging Cradle for Honeywell CT30 XP
SKU: PRO-711334 Mfgr Part#: 711334
|
|
|
|
ProClip USA
ProClip 6.5" Pedestal Mount, Steel
Universal Pedestal Mount 6.5" Inch or 5" Steel 20mm Ball AMPS Plates M5 AMPS Holes
SKU: PRO-100407 Mfgr Part#: 100407
|
|
|
ProClip USA
6 Inch Goose Neck
6 Inch Goose Neck
SKU: PRO-215181 Mfgr Part#: 215181
|
|
|
|
ProClip USA
Honeywell RP4 Plate, Fan Fold, Battery
Printer Mount Plate with Fan Fold Slot Battery Access for Honeywell RP4
SKU: PRO-216347 Mfgr Part#: 216347
|
|
|
|
ProClip USA
zebra 3600 standard scanner mount
Standard scanner mount for Zebra 3600 series
SKU: PRO-241464 Mfgr Part#: 241464
|
|
|
|
ProClip USA
ProClip Cig Plug Adapter 5.4V 2.7A
ProClip Cigarette Lighter Charger 6 Pin Molex Connector 12/24V to 5.4V 2.7A
SKU: PRO-241580 Mfgr Part#: 241580
|
|
|
|
ProClip USA
Holder for Zebra TC22/27 (No Boot)
Non-Charging Cradle with Tilt-Swivel Zebra TC22 / TC27 (Bare Device)
SKU: PRO-711347 Mfgr Part#: 711347
|
|
|
|
ProClip USA
AC Wall Power Supply 110-240V 1.3A AC In
AC Wall Power Supply 110-240V 1.3A AC Input 5.4V 2.7A DC Output - 6-Pin Molex Interchangeable Wall Plugs 5 Foot Cable
SKU: PRO-941026 Mfgr Part#: 941026
|
|
|
|
ProClip USA
ProClip Non-Charge Cradle CT 45 / 45XP
Non-Charging Cradle Honeywell CT45 / CT45 XP with Protective Boot
SKU: PRO-711322 Mfgr Part#: 711322
|
|
|
|
ProClip USA
Vibration Damper - Heavy Duty
This Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
SKU: PRO-241474 Mfgr Part#: 241474
|
|
|
|
ProClip USA
Zebra MC9400 MC9300 - PCB with Pogo Pins
Zebra MC9400 MC9300 - PCB with Pogo Pins and 6-Pin Molex
SKU: PRO-LOD351 Mfgr Part#: LOD351
|
|
