|
Description |
Price
(USD)
|
Availability
|
|
ProClip USA
PIPE MOUNTw/PLATE 90DEG 50X160MM
For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a 90 degree mounting plate sized 160x50 mm with 6 pre-drilled holes. The mount fits pipes with diameter 19 mm or 3/4 inch is the smallest diameter pipe or bar. 30 mm or 1 1/8 inch is the largest diameter pipe or bar. Made in black plastic.
SKU: PRO-215667 Mfgr Part#: 215667
|
|
|
|
ProClip USA
U MOUNT 45 to 50MM WIDE
Perfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 45-50mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
SKU: PRO-215709 Mfgr Part#: 215709
|
|
|
|
ProClip USA
U MOUNT 35 to 40MM WIDE
Perfect for use on square posts. Attach a Device holder for your device to the face plate and you are all set to go. Fits bars and square posts that are 34 - 40mm wide. Very strong construction. Supports heavy devices. Provides a firm installation
SKU: PRO-215710 Mfgr Part#: 215710
|
|
|
|
ProClip USA
ProClip QRD w/ Suction Cup Mount 6 Inch
Quick Release Dock with Suction Cup Mount 6 Inch
SKU: PRO-100280 Mfgr Part#: 100280
|
|
|
ProClip USA
PRO QUICK RELEASE POWER DOCK HRDWIRE
The Quick Release Power Dock combines a electrical connection with the convenience of quick release. Can be used with any holder that incorporates the Quick Release Power Dock. Includes power harness for hard-wiring into a vehicle. Key lock for added security. Only for sleeves that feature the Quick Release Power Dock. Allows a Tough Sleeve to be moved between multiple locations. Keeps your device charged while also providing easy removal from the mount. 4 screws + nuts and 1 torx key included
SKU: PRO-241337 Mfgr Part#: 241337
|
|
|
|
ProClip USA
PIVOT MOUT ADJUSTABLE AMPS PLATE
A pivoting AMPS mounting plate for use with ProClip aluminum mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users. - 180 degree pivoting head for mounting ProClip device holders - AMPS hole pattern on both head and base to allow use with ProClip mounts or any product that uses the AMPS hole pattern - Easily accessible thumb lever allows you to lock pivot in place
SKU: PRO-215717 Mfgr Part#: 215717
|
|
|
|
ProClip USA
Heavy Duty Aluminum Pipe Mount .75"-1.5"
HEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 3/4 IN. TO 1 1/4 IN. (19-30 MM) HOLE PATTERN: AMPS
SKU: PRO-216107 Mfgr Part#: 216107
|
|
|
|
ProClip USA
ModTek Hard Case Samsung Tab A7 Lite 8.7
ModTek Hard Case for Samsung Galaxy Tab A7 Lite 8.7" (2021 SM-T220 SM-T225 SM-T-227)
SKU: PRO-216414 Mfgr Part#: 216414
|
|
|
|
ProClip USA
ModTek Hard Case Samsung Tab Active3
ModTek Hard Case for Samsung Galaxy Tab Active3 (2020 SM-T575)
SKU: PRO-216415 Mfgr Part#: 216415
|
|
|
|
ProClip USA
ModTek Hard Case Apple iPad Mini 6th Gen
ModTek Hard Case for Apple iPad Mini 6th Generation (2021)
SKU: PRO-216416 Mfgr Part#: 216416
|
|
|
|
ProClip USA
ModTek Hard Case for Rhino T80 8" Tablet
ModTek Hard Case for Rhino T80 8" Tablet
SKU: PRO-216471 Mfgr Part#: 216471
|
|
|
|
ProClip USA
ProClip QRD w/ Suction Cup Mount 7.5 In.
Quick Release Dock with Suction Cup Mount 7.5 Inch
SKU: PRO-100281 Mfgr Part#: 100281
|
|
|
|
ProClip USA
Heavy-Duty Pivot Mount - M4 Diameter
A pivoting AMPS mounting plate for use with ProClip aluminum pedestal mounts. Can be attached to the top of any of our mounts to provide a 180 degree pivot to face either direction. Great for when a device needs to be seen by multiple users.
SKU: PRO-215741 Mfgr Part#: 215741
|
|
|
ProClip USA
Power Supply 12-48V Input - 12V Output
Hard-Wired Power Supply 12-48V Input 12V 3A Output (IP1339 charging box with 2-PIn Molex Cable IP811 and 6-Pin Molex 12V Output Cable IP1341)
SKU: PRO-216355 Mfgr Part#: 216355
|
|
|
|
ProClip USA
ZEB DS3600 CRADLE VIBE DAMPER
Zebra DS3600 Scanner Mount with Vibration Damper. This is a high quality custom made cradle with a neat and discreet design. Easily slide your device in & out of the cradle. No more fumbling around for your device. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. The preinstalled vibration damper softens vibrations caused by machinery or rough terrain.
SKU: PRO-241480 Mfgr Part#: 241480
|
|
|
|
ProClip USA
UNIVERSAL TABLET HOLDER SMALL
This Small universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit small tablets that are 120 - 150 mm (4.72 - 5.91 inches) in width.
SKU: PRO-511848 Mfgr Part#: 511848
|
|
|
|
ProClip USA
MOUNT BRACKET - 4-PORT USB HUB STARTECH
MOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
SKU: PRO-241380 Mfgr Part#: 241380
|
|
|
|
ProClip USA
HEAVYDUTY SEATRAIL MOUNT AMPS PLATE 22"
HEAVY DUTY SEAT RAIL MOUNT WITH AMPS PLATE 22"
SKU: PRO-710873 Mfgr Part#: 710873
|
|
|
|
ProClip USA
ProClip Center Mount Volvo Trucks
ProClip Center Mount Volvo Trucks
SKU: PRO-213548 Mfgr Part#: 213548
|
|
|
ProClip USA
HEAVYDUTY CLAMP MOUNT 3.375 x 5.125
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
SKU: PRO-215677 Mfgr Part#: 215677
|
|
|
|
ProClip USA
ProClip Heavy-Duty Clamp Mount 5 1/8 In.
Heavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
SKU: PRO-216091 Mfgr Part#: 216091
|
|
|
|
ProClip USA
HeavyDuty Aluminum PipeMount 1.25-1.625"
HEAVY DUTY ALUMINUM PIPE MOUNT, AMPS M4 THREADED HOLES, INTEGRATED RUBBER PADS DIAMETER: 1 1/4 IN. TO 1 5/8 IN. (29-42 MM) HOLE PATTERN: AMPS
SKU: PRO-216114 Mfgr Part#: 216114
|
|
|
|
ProClip USA
UNIVERSAL TABLET HOLDER MEDIUM
This Medium universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit medium sized tablets that are 140 - 195 mm (5.51 - 7.68 inches) in width.
SKU: PRO-511849 Mfgr Part#: 511849
|
|
|
|
ProClip USA
ModTek Hard Case for Apple iPad 10th Gen
ModTek Hard Case for Apple iPad 10th Gen
SKU: PRO-216429 Mfgr Part#: 216429
|
|
|
|
ProClip USA
MOUNT HD 2 INCH - RND TO SQUARE
This 2 inch Mount has teeth within the interlocking joints providing a very strong connection. It is made of aluminum and can be used in a variety of vehicles and locations like retail stores, kiosks and gyms. - The mounts come in 2, 4, 6, 8, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique solution.
SKU: PRO-215836 Mfgr Part#: 215836
|
|
|
|
ProClip USA
MOUNT HD 2 INCH ROUND BASE
This aluminum 2 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
SKU: PRO-215839 Mfgr Part#: 215839
|
|
|
|
ProClip USA
Heavy Duty Swivel Mount
Heavy Duty Swivel, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, Does not include base plates.
SKU: PRO-216162 Mfgr Part#: 216162
|
|
|
|
ProClip USA
UNIVERSAL TABLET HOLDER LARGE
This Large universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit large tablets that are 180 - 230 mm (7.09 - 9.06 inches) in width.
SKU: PRO-511850 Mfgr Part#: 511850
|
|
|
|
ProClip USA
ProClip Adjustable Tablet Holder - Small
Small Spring Loaded Adjustable Tablet Holder Height adjustment 4 5/8 -5 7/8 inches (120-150 mm) For devices 1 1/8 Inch Thick (30mm)
SKU: PRO-511971 Mfgr Part#: 511971
|
|
|
|
ProClip USA
ProClip Adj Charge Holder 75-89/12-16mm
ADJUSTABLE CHARGING HOLDER WITH Tilt-Swivel FOR HARD WIRED INSTALLATION USB-C to USB-A Universal Holder 75-89mm / 12-16mm
SKU: PRO-527845 Mfgr Part#: 527845
|
|
