|
Description |
Price
(USD)
|
Availability
|
|
HAT Design Works
Verifone & Pax Payment Device Stand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Easily slide device into place and secure with included Torx, T15 L-Key. Counter mounting hardware not included.
SKU: IOP-PTS04M400MX91510 Mfgr Part#: PTS-04-M400/MX915-104
|
|
|
|
HAT Design Works
Adhesive Base, Lightweight w/glue pad
Adhesive Base, Lightweight w/glue pad
SKU: IOP-PTSADBZNC Mfgr Part#: PTS-ADB-ZNC
|
|
|
|
HAT Design Works
4in Arm Exten Modular Now & 9110 Ser BLK
4" rigid extension arm can be added to the Modular Now and 9110 series. Die cast aluminum. Compatible with MNPL10, MNPA, MNTR, MNKB, MNYK
SKU: IOP-MNEA1004B Mfgr Part#: MNEA10-04B
|
|
|
|
HAT Design Works
Payment Terminal Freestanding Base Kit
Payment Terminal Freestanding Base Kit
SKU: IOP-PTSFSB603 Mfgr Part#: PTS-FSB-603
|
|
|
|
HAT Design Works
Ingen Lane ADPT w/Locking KeyOnly NoStnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414304 Mfgr Part#: RP414304
|
|
|
|
HAT Design Works
Payment Device Stand with Quick Release
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Quick release, non-removeable key. Compatible with Supports Ingenico Lane 3000 / 5000 / 7000 / 8000. Counter mounting hardware not included. Black
SKU: IOP-PTS04LANEWK104 Mfgr Part#: PTS-04-LANE-WK-104
|
|
|
|
HAT Design Works
Single Monitor Stand
Single Monitor Stand
SKU: IOP-DMRS1 Mfgr Part#: DMRS-1
|
|
|
|
HAT Design Works
Quick Kit 17 inch Pole w/Surface Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1017SB Mfgr Part#: MNPL10-17SB
|
|
|
|
HAT Design Works
Ingenico LANE Payment Device Stand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included Key. Compatible with Supports Ingenico Lane 3000 / 5000 / 7000 / 8000. Counter mounting hardware not included. Black
SKU: IOP-PTS04LANE104 Mfgr Part#: PTS-04-LANE-104
|
|
|
|
HAT Design Works
Verifone Payment Device Stand P200/P400
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included Torx, T10 L-Key. Compatible with Verifone P200 & P400. Counter mounting hardware not included.
SKU: IOP-PTS04P200P400104 Mfgr Part#: PTS-04-P200/P400-104
|
|
|
|
HAT Design Works
Articl Wall Mnt w/HD Tilter extn 14.9in
Great for Touchscreen applications or heavier displays. Offers tilt and left to right pivot with friction adjustment and portrait to landscape rotation. Articulating, fold to Includes 3.5 inches or extend out to 14.9 inches. Cable management runs under extension arm. Color black.
SKU: IOP-9110HD8.54104 Mfgr Part#: 9110-HD-8.5-4-104
|
|
|
|
HAT Design Works
Modular Now 4" Surface Mount Pole Kit wi
HAT Design Works, MODULAR NOW Compact Surface Mount with 75/100 MM VESA. 4" HEIGHT With Minimal Footprint. FOR NO-BOLT, Freestanding Solution, Suggest Add MNMT10-FSMB, MNMT10-TRP-FSMB OR MNMT10-SM-FS14X14B. BLACK
SKU: IOP-MNPL1004SB Mfgr Part#: MNPL10-04SB
|
|
|
|
HAT Design Works
Wall Mount with Heavy Duty Tilter
Great for Touchscreen applications or heavier displays. Offers tilt and left to right pivot with friction adjustment. Positions display 4 inches from the mounting surface. Mounting hardware not included. Color black. TAA Compliant.
SKU: IOP-9110HD104 Mfgr Part#: 9110-HD-104
|
|
|
|
HAT Design Works
IngenLane ADPT w/QuickReleaseOnly NoStnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414304WK Mfgr Part#: RP414304-WK
|
|
|
|
HAT Design Works
Universal Payment Device Clamping Stand
Design includes reposition tabs with rubber grips to hold device securely. Ten slot locations adjusts to fit a variety of payment devices. Width range 2.9-3.8 inches. Maximum length 7.4 inches. Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Counter mounting hardware not included. Black.
SKU: IOP-PTS04UNIV104 Mfgr Part#: PTS-04-UNIV-104
|
|
|
|
HAT Design Works
7000 Series Flat Panel Radial Arm 500N C
7000 Series Flat Panel Radial Arm 500N Cylinder w/HD Spring Tilter, No Mount
SKU: IOP-7000500NMHD104 Mfgr Part#: 7000-500-NM-HD-104
|
|
|
|
HAT Design Works
Verifone P200 & P400 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414868 Mfgr Part#: RP414868
|
|
|
|
HAT Design Works
Small Screen Slider Bracket, 12", BLK
Extend your VESA adapter 12 inches to enable mounting of a payment terminal device or a scanner fork bracket to side of monitor. Made of 12 gauge cold rolled steelwith a reinforced design for stabilty. Includes hardware kit with 4 qty M4 x 10mm PPhMS, 3 qty PPhMS, M5-0.8 x 6mm B.O. and 1 qty 1/4" nylon cable clip. PTS adapters and scanner fork sold separately.
SKU: IOP-MNSL1012B Mfgr Part#: MNSL10-12B
|
|
|
|
HAT Design Works
Modular Now Printer Tray SM & wall mount
Includes tray 6x5.5in, 8.5in extension arm, and wall mount. Color black.
SKU: IOP-MNTR11WM08B Mfgr Part#: MNTR11-WM-08B
|
|
|
|
HAT Design Works
Through-Counter Display Mount, 12in BLK
Ideal solution for retailers wanting to keep cables out of public reach. Mount the base on top of the counter and adjust height from underneath the coutned using a set screw in the mount. Tube passes through covered grommet hole in the counter. Internal cable routing allows cable to remaining out of view and safe from public reach. Tilter mounted at top of pole to support displays offers lock in place tilter to set at preferred viewing angle. Includes VESA adapter with 75x75 mm and 100x100mm hole patterns. Surface mounting hardware not included. Clearance for 1/4-20 screws. Powder coat, color black.
SKU: IOP-918912104 Mfgr Part#: 9189-12-104
|
|
|
|
HAT Design Works
Modular Now Dual Yoke Assembly
Pair with a modular now pole sold separately.
SKU: IOP-MNYK10DYKB Mfgr Part#: MNYK10-DYKB
|
|
|
|
HAT Design Works
Modular Now Printer Tray for pole
Includes tray 8x6in, 8.5in extension arm, and yoke. Color black.
SKU: IOP-MNTR1008B Mfgr Part#: MNTR10-08B
|
|
|
|
HAT Design Works
Adhesive Weighted Base with Glue Pad
Accessory only. Pair with Modular Now Payment Terminal Stands.
SKU: IOP-PTSADB603 Mfgr Part#: PTS-ADB-603
|
|
|
|
HAT Design Works
WlMnt & ExtenArm w/HDTilter PosDsp 7.8in
Great for Touchscreen applications or heavier displays. Offers tilt and left to right pivot with friction adjustment and portrait to landscape rotation. Positions display 7.8 inches from the mounting surface. Mounting hardware not included. Color black. TAA Compliant.
SKU: IOP-9110HD4104 Mfgr Part#: 9110-HD-4-104
|
|
|
|
HAT Design Works
Quick Kit 12 Inch Pole with Thru Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1012TB Mfgr Part#: MNPL10-12TB
|
|
|
|
HAT Design Works
75mm and 100mm VESA plate
Compatible with Innovative Design Works products only.
SKU: IOP-7VESASTAR175603 Mfgr Part#: 7VESASTAR175-603
|
|
|
|
HAT Design Works
Modular Now Small Printer Tray for pole
Includes tray 6in x 5.5in, 8.5in extension arm, and yoke. Color black.
SKU: IOP-MNTR1108B Mfgr Part#: MNTR11-08B
|
|
|
|
HAT Design Works
Modular Now Printer Tray LG & wall mount
Includes tray 11x10.5in, 8.5in extension arm, and wall mount. Color black.
SKU: IOP-MNTR12WM08B Mfgr Part#: MNTR12-WM-08B
|
|
|
|
HAT Design Works
Universal Clamping Wall Mount, Black
Universal Clamping Wall Mount, Black
SKU: IOP-PTSWMUNIV104 Mfgr Part#: PTS-WM-UNIV-104
|
|
|
|
HAT Design Works
Wire Shelving Monitor Mnt w/ 8in ext BLK
Fits on 1 inch diameter pole. Offers tilt and left to right pivot with friction adjustment and portrait to landscape rotation. Includes 8 inch arm extension for overall reach of 11.4 inches. Cable management under arm extension. Color black.
SKU: IOP-911084608.5104 Mfgr Part#: 9110-8460-8.5-104
|
|
