|
|
Home >
HAT Design Works
|
|
|
|
|
Showing: 331 - 360 of 490 Items
|
Total Page(s): 17
|
[First]
[Prev 10]
7
8
9
10
11
12
13
14
15
16
[Next 10]
[Last]
|
|
Description |
Price
(USD)
|
Availability
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, WINSTON ELECTRIC SIT STAND TRIPLE, COMPACT
SKU: HAT-WNSTE-3-CW-270 Mfgr Part#: WNSTE-3-CW-270
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, BILD CLAMP MOUNT FOR SIX DISPLAYS, THREE OVER THREE. SUPPORTS SIX 24'' MONITORS OR 4 32'' DISPLAYS. IDEAL FOR COMMAND AND CONTROL, BROADCASTING AND FINANCE.
SKU: HAT-BILD-3/3-CM-104 Mfgr Part#: BILD-3/3-CM-104
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, S-COLLECTION WALL MOUNT 3-STAGE HEIGHT ADJUSTABLE WORKSTATION W/DIGITAL UP/DOWN SWITCH. RANGE: 22.2''-48.7''. LIFT CAPACITY: 250LB RAISING 1.5''/SEC. MEETS ANSI/BIFMA STANDARDS. SILV
SKU: HAT-SX2-A-WM-S-DS Mfgr Part#: SX2-A-WM-S-DS
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, HAT COLLECTIVE HEALTHCARE 31 INCH VERTICAL WALL TRACK W/ TWO ERGONOMIC ARMS; 1ST FOR SINGLE MONITOR 7.5-25 LBS, 2ND FOR KEYBOARD & MOUSE. FOLDS TO 4.5 IN. EXTENDS TO 24 IN. BLACK. TA
SKU: HAT-HM-WT004-800-104 Mfgr Part#: HM-WT004-800-104
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, BILD CLAMP MOUNT FOR 8 DISPLAYS, FOUR OVER FOUR. SUPPORTS EIGHT 24" MONITORS UP TO 30 LBS EACH. IDEAL FOR COMMAND AND CONTROL, BROADCASTING AND FINANCE. 75, 100 VESA. BLACK
SKU: HAT-BILD-4/4-CM-104 Mfgr Part#: BILD-4/4-CM-104
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, BILD CLAMP MOUNT FOR 8 DISPLAYS, FOUR OVER FOUR. SUPPORTS EIGHT 24" MONITORS UP TO 30 LBS EACH. IDEAL FOR COMMAND AND CONTROL, BROADCASTING AND FINANCE. 75, 100 VESA. SILVER
SKU: HAT-BILD-4/4-CM-124 Mfgr Part#: BILD-4/4-CM-124
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, HEALTHCARE HEIGHT ADJUSTABLE TANGO LAPTOP CART WITH ANTIMICROBIAL LOCKING WORKSURFACE, KEYBOARD & MOUSE TRAY, 2 LOCKING & 2 NON-LOCKING FOUR INCH CASTERS. ACCESSORIES AVAILABLE & SOL
SKU: HAT-TNG-H-NP Mfgr Part#: TNG-H-NP
|
|
|
HAT Design Works
Flexmount Kit, Black
Accessory mount. Six in one Flexmount design for desk edge, grommet, bolt-thru, side bolt, wall and reverse wall mounting. Compatible with 3500, 7000, LCD and Euro pole series. Black
SKU: IOP-8111104 Mfgr Part#: 8111-104
|
|
|
|
HAT Design Works
Verifone VX805/VX820 Payment DeviceStand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included Torx, T6 L-Key. Compatible with Verifone VX805 and VX280. Counter mounting hardware not included.
SKU: IOP-PTS04VX805VX8201 Mfgr Part#: PTS-04-VX805/VX820-104
|
|
|
|
HAT Design Works
Payment Terminal Device Adapter w/Yoke
Mount your Verifone MX915, M925, M400, M440 or Pax PX7 for ergonomic positioning. Offers tilt and swivel left to right with friction adjustment. Pair with Modular Now Pole Mount (sold separately). Easily slide device into place and secure with included Torx, T15 L-Key. Yoke also fits 9183, 9189, 9230 series or any 2 inch OD pole. Black.
SKU: IOP-MNPA10M400MX9151 Mfgr Part#: MNPA10-M400-MX915-104
|
|
|
|
HAT Design Works
Modular Now Grocery Mount, rail
Modular Now 14" Surface Mount Pole Kit for Grocery (For 1.49" Rails) with HD 75/100 VESA Tilter, Black
SKU: IOP-6296214104 Mfgr Part#: 62962-14-104
|
|
|
|
HAT Design Works
8.5in Arm Exten Staxx & 9110 Series BLK
8.5 rigid extension arm can be added to the Staxx and 9110 series. Includes cable management under the arm. Die cast aluminum.
SKU: IOP-91189130104 Mfgr Part#: 9118-9130-104
|
|
|
|
HAT Design Works
Large Screen Slider Bracket, 18", BLK
Extend your VESA adapter 18 inches to enable mounting of a payment terminal device or a scanner fork bracket to side of monitor. Made of 12 gauge cold rolled steelwith a reinforced design for stabilty. Includes hardware kit with 4 qty M4 x 10mm PPhMS, 3 qty PPhMS, M5-0.8 x 6mm B.O. and 1 qty 1/4" nylon cable clip. PTS adapters and scanner fork sold separately.
SKU: IOP-MNSL1018B Mfgr Part#: MNSL10-18B
|
|
|
|
HAT Design Works
WlMnt & ExtenArm w/HDTilter PosDsp11.4in
Great for Touchscreen applications or heavier displays. Offers tilt and left to right pivot with friction adjustment and portrait to landscape rotation. Positions display 11.4 inches from the mounting surface. Cable clip runs under arm extension. Mounting hardware not included. Color black. TAA Compliant.
SKU: IOP-9110HD8.5104 Mfgr Part#: 9110-HD-8.5-104
|
|
|
|
HAT Design Works
Dual Quick Kit 24 inch w/Surface Mount
Mount two displays back to back. Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL10D24SB Mfgr Part#: MNPL10-D-24SB
|
|
|
|
HAT Design Works
Freestanding Base Plate w/neoprene pad
Pair with a modular now pole sold separately.
SKU: IOP-MNPT10FSMB Mfgr Part#: MNPT10-FSMB
|
|
|
|
HAT Design Works
Compact Countertop Mount w/VESA, BLACK
Our compact, fixed-height POS mount with durable contruction stands up to retail use to support small displays or signature capture devices. Includes lock in place tilter to set at preferred viewing angle. Internal cable management can pass through the counter or out the back of the base. 75/100 VESA adapter included. Four inch outter diameter. Positions center of display at max height of 7 inches. Surface mounting hardware not included. Clearance for 1/4-20 screws. Color black.
SKU: IOP-9190104 Mfgr Part#: 9190-104
|
|
|
|
HAT Design Works
Freestanding Base w/ Suction Cup Feet
9" x 10" x .50" Small Freestanding Base with Suction Cup Feet (MNPL1x-xxTB Pole Mount Only), Black
SKU: IOP-MNMT10SCFS9X10B Mfgr Part#: MNMT10-SC-FS9X10B
|
|
|
|
HAT Design Works
Wire Shelving Mnt articl extn 14.9in BLK
Fits on 1 inch diameter pole. Offers tilt and left to right pivot with friction adjustment and portrait to landscape rotation. Articulating, fold to Includes 3.5 inches or extend out to 14.9 inches. Cable management runs under extension arm. Color black.
SKU: IOP-911084608.54104 Mfgr Part#: 9110-8460-8.5-4-104
|
|
|
|
HAT Design Works
Quick Kit 20 Inch Pole with Thru Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1020TB Mfgr Part#: MNPL10-20TB
|
|
|
|
HAT Design Works
Quick Kit 14 inch Pole w/Surface Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1014SB Mfgr Part#: MNPL10-14SB
|
|
|
|
HAT Design Works
Dual Quick Kit 12 inch w/Surface Mount
Mount two displays back to back. Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL10D12SB Mfgr Part#: MNPL10-D-12SB
|
|
|
|
HAT Design Works
Free Standing Height Adj Kiosk BLACK
Our freestanding pole mount for flat panel monitors and tablets. Perfect for trade shows, education, retail, hospitality, and more anywhere there is a need to temporarily set up a kiosk or digital display. Pole adjusts 30in-50in. Two inch outer pole is compatible with Modular Now Accessories to add small printers, payment terminals, etc. Internal cable management enters from top of tilter and exits at base of pole. Weighted base has a 14 inch outer diameter, made of heavy steel for ballast. Includes 75/100 VESA adapter. Black
SKU: IOP-923050104 Mfgr Part#: 9230-50-104
|
|
|
|
HAT Design Works
4in Arm Extens Staxx & 9110 Series BLK
4 rigid extension arm can be added to the Staxx and 9110 series. Die cast aluminum
SKU: IOP-91189112104 Mfgr Part#: 9118-9112-104
|
|
|
|
HAT Design Works
Equinox 6200m Adapter, Black
Equinox 6200m Adapter (Pole or Wall Mount Required), Black
SKU: IOP-MNPA106200M104 Mfgr Part#: MNPA10-6200M-104
|
|
|
|
HAT Design Works
Equinox 8500i Adapter, Black
Equinox 8500i Adapter (Pole or Wall Mount Required), Black
SKU: IOP-MNPA108500I104 Mfgr Part#: MNPA10-8500I-104
|
|
|
|
HAT Design Works
Ingenico iPP320 / iPP350 Adapter, Black
Ingenico iPP320 / iPP350 Adapter (Pole or Wall Mount Required), Black
SKU: IOP-MNPA10IPP3203501 Mfgr Part#: MNPA10-IPP320-350-104
|
|
|
|
HAT Design Works
Ingenico iSC250 / iSC480 Adapter , Black
Ingenico iSC250 / iSC480 Adapter (Pole or Wall Mount Required), Black
SKU: IOP-MNPA10ISC2504801 Mfgr Part#: MNPA10-ISC250-480-104
|
|
|
|
HAT Design Works
Verifone P200/P400 Pole Adapter w/yoke
Mount your P200 or P400 for ergonomic positioning. Offers tilt and swivel left to right with friction adjustment. Pair with Modular Now Pole Mount (sold separately). Secure device with included Torx, T10 L-Key. Yoke also fits 9183, 9189, 9230 series or any 2 inch OD pole. Black.
SKU: IOP-MNPA10P200P40010 Mfgr Part#: MNPA10-P200-P400-104
|
|
|
|
HAT Design Works
Verifone VX805/VX820 Adapter, Black
(Pole or Wall Mount Required)
SKU: IOP-MNPA10VX805VX820 Mfgr Part#: MNPA10-VX805-VX820-104
|
|
|
|
|
|
[First]
[Prev 10]
7
8
9
10
11
12
13
14
15
16
[Next 10]
[Last]
|
|
Showing: 331 - 360 of 490 Items
|
Total Page(s): 17
|
|
Home >
HAT Design Works
|
Office Computers, All-in-One Terminals, Touch Screen Computers Desktop, Office Systems
|
|
