|
Description |
Price
(USD)
|
Availability
|
|
HAT Design Works
Dual Tier Foldable Pole Mount, Black
Stack two displays one over this other. 28 inch pole. FlexMount for mounting six ways including Desk clamp, grommet, bolt-thru, side bolt, wall and reverse wall mount. Offers 12.5 inches of reach or folds to 3.5 inches. Cable management under arms and clip along pole. Color Black. TAA Compliant
SKU: IOP-9112D28FM104 Mfgr Part#: 9112-D-28-FM-104
|
|
|
|
HAT Design Works
Dual Quick Kit 14 inch w/Surface Mount
Mount two displays back to back. Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL10D14SB Mfgr Part#: MNPL10-D-14SB
|
|
|
|
HAT Design Works
7500 Deluxe Mntr Arm Sngl BLK sup6-12lbs
7500 Deluxe Monitor Arm. Includes Flexmount for desk edge clamp, grommet, bolt-thru, side bolt and wall mount. Spring assisted tilter with VESA Adapter. Supports 6-12lbs. Pass through cable management. TAA compliant. Black
SKU: IOP-7500800104 Mfgr Part#: 7500-800-104
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, WINSTON SIT STAND DUAL BLACK
SKU: HAT-WNST-2-104 Mfgr Part#: WNST-2-104
|
|
|
|
HAT Design Works
Thin Client, Micro, KDS Mounting Bracket
Mount your small form factor CPU or Kitchen Display Controller with our adjustable bracket (0.6in-2.7in wide). VESA 75/100 hole patterns in side along with ventilation slots. Strap included for optional use. Adhesive pads included to cushion device if desired. Mount to wall, ergonomic arm, under counter or to a 1 inch diameter pole. Max weight capacity 11 lbs. Black
SKU: IOP-FDMTCMB Mfgr Part#: FDM-TCM-B
|
|
|
|
HAT Design Works
Scanner Fork Only, Black
Pair with a HAT Design Works slider bracket to support a barcode scanner on the side of a monitor.
SKU: IOP-RP115913104 Mfgr Part#: RP115913-104
|
|
|
|
HAT DESIGN WORKS
OPEN BOX, HAT DESIGN WORKS, INGENICO LANE STAND WITH LOCKING KEYNCNR
SKU: HAT-PTS-04-LANE-104-OPEN BOX Mfgr Part#: PTS-04-LANE-104-OPEN BOX
|
|
|
|
HAT Design Works
Ingenico iPP320 iPP350 Wall Mount Black
Wall mount your payment terminal. Adjustable tilt friction. Adjustable friction for left to right pivot. Secure device with included M2.5-0.45x12mm PPhMS plus Cable Clip. Compatible with Ingenico iPP320/iPP350. Mounting hardware not included.
SKU: IOP-PTSWMIPP32035010 Mfgr Part#: PTS-WM-IPP320-350-104
|
|
|
|
HAT Design Works
Compact Low Profile Wall Mount
For displays with 75mmx75mm or 100mmx100mm VESA hole patterns. Wall mounting hardware not included.
SKU: IOP-9135603 Mfgr Part#: 9135-603
|
|
|
|
HAT Design Works
E2 Single Monitor Arm, Black
Supports one display up to 32 inches. Supports weight 2.2 to 20 LBS, Height adjustable from 7.3 up to 20.3 inches from desktop, Extension Range 23.7 inches. Tilt 180 degrees with pivot from Landscape to Portrait. C-Clamp, Grommet, VESA 75mm & 100mm, quick-release. adapaters included, 10 year warranty
SKU: IOP-E21104 Mfgr Part#: E2-1-104
|
|
|
|
HAT Design Works
Stand for Single Monitor Monitor, Black
Free-standing single monitor mount. 14 inch pole height. Base dimensions 9.5 inches wide, 10.5 inches long.
SKU: IOP-9109S104 Mfgr Part#: 9109-S-104
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, 100 SERIES QUAD/HEX MONITOR DESK STAND. ACCOMMODATES UP TO (6) 27'' OR (4) 34'' DISPLAYS. MAX 25 LBS PER MONITOR. 75 & 100MM. BLACK
SKU: HAT-100-D28-B33 Mfgr Part#: 100-D28-B33
|
|
|
|
HAT Design Works
Dual E2 Thru Mount Conversion Kit
Dual E2 Thru Mount Conversion Kit
SKU: IOP-8540TMCK Mfgr Part#: 8540-TM-CK
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, TOP-DOWN THRU MOUNT CONVERSTION KIT. TO BE ORDERED WITH HAT DESIGN WORKS MONITOR ARM WITH TOP DOWN MOUNT FOR AN ALTERNATE THRU MOUNT INSTALLATION.
SKU: HAT-8524-TM-CK Mfgr Part#: 8524-TM-CK
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, REPLACEMENT PART T10 TORX L-KEY
SKU: HAT-P714898 Mfgr Part#: P714898
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, SPACER HARDWARE KIT, INCLUDES FOUR QUARTER INCH SPACERS AND FOUR M4X18MM PHILIPS PAN HEAD SCREWS
SKU: HAT-P404923-B Mfgr Part#: P404923-B
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, SPACER HARDWARE KIT, INCLUDES FOUR HALF INCH SPACERS AND FOUR M4X25MM PHILIPS PAN HEAD SCREWS
SKU: HAT-P404923-C Mfgr Part#: P404923-C
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, 75MM VESA PLATE & SCREWS
SKU: HAT-7VESA75-603 Mfgr Part#: 7VESA75-603
|
|
|
|
HAT Design Works
CABLE WRAP 15 INCH LENGTH
SELF CLOSING WRAP, ABRASION RESISTANT
SKU: IOP-P11407815 Mfgr Part#: P114078-15
|
|
|
|
HAT Design Works
Tilter Bushing Reducer
Reduce bushing on mount cups, wall mount or slatwall mount to accommodate tilter shaft. Compatible with Innovative products only.
SKU: IOP-8302 Mfgr Part#: 8302
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, REPLACEMENT PART. LARGE L BRACKET FOR FLEXMOUNT. BLACK E-COAT FINISH.
SKU: HAT-RP701117-603 Mfgr Part#: RP701117-603
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, MOUNT HARDWARE KIT FOR MNPLXX-XXSB POLE KITS, INCLUDES FOUR 2.5" BOLTS, NYLOCK NUTS, AND WASHERS
SKU: HAT-RP415474 Mfgr Part#: RP415474
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, REPLACEMENT PART, WALL MOUNT CASTING WITH BUSHING, BLACK
SKU: HAT-RP406795-104 Mfgr Part#: RP406795-104
|
|
|
|
HAT Design Works
100 x 200mm Vesa Plate
Compatible with Innovative Design Works products only.
SKU: IOP-7VESA1X2603 Mfgr Part#: 7VESA1X2-603
|
|
|
|
HAT Design Works
HAT Design Works Mounting Acc
HAT Design Works Reya is flexible: Conversion kit allows the Reya Standard Suface Power Module to be mounted underneath worksurface. Kit: Includes mounting bracket, screws, and wire management clips (Reya Standard Surface Power Module sold separately).
SKU: IOP-PWRUMCK Mfgr Part#: PWR-UM-CK
|
|
|
|
HAT DESIGN WORKS
HAT DESIGN WORKS, FLEX MOUNT CUP ASSEMBLY. COMPATIBLE WITH 7500 ARMS. BLACK. TAA COMPLIANT
SKU: HAT-8318-CUP-104 Mfgr Part#: 8318-CUP-104
|
|
|
|
HAT Design Works
FLEXMOUNT COMPONENTS FOR WALL
WALL CONFIGURATION ONLY. INCLUDES CUP COMPATIBLE w/3500 & 7000 SERIES AND LARGE L BRACKET. WALL SCREWS NOT INCLUDED.
SKU: IOP-8111WALL104 Mfgr Part#: 8111-WALL-104
|
|
|
|
HAT Design Works
Equinox 8500i Adapter Only (No Stand)
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414475 Mfgr Part#: RP414475
|
|
|
|
HAT Design Works
VerifoneMX915/MX925/M400/M440/PaxPX7ADPT
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414596 Mfgr Part#: RP414596
|
|
|
|
HAT Design Works
Verifone VX805 & VX820 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414637 Mfgr Part#: RP414637
|
|
