|
Description |
Price
(USD)
|
Availability
|
|
ProClip USA
6 Pin Molex Male to Male Cable 12V
6 Pin Molex Male to Male Cable (70cm / 2.5 Feet) For 12V Power Supplies Connects Holder to Power Supply
SKU: PRO-IP1341 Mfgr Part#: IP1341
|
|
|
ProClip USA
ProClip 1.5" Ball to AMPS Plate
1.5" Ball to AMPS Plate
SKU: PRO-100200 Mfgr Part#: 100200
|
|
|
|
ProClip USA
ProClip 6-Pin Molex Male to Male
Power Cable (70 cm/2.5 feet) with 6 Pin Male Molex Connectors for use between the sliding power block and Voltage Conversion Box
SKU: PRO-IP810 Mfgr Part#: IP810
|
|
|
|
ProClip USA
HEAVY DUTY TILT SWIVEL
This Tilt-Swivel is made for use with holders for heavier devices e.g. Tablets, Mobile Computing devices, Bar Code Scanners, Two-way Radios etc. Tilt, swivel and/or extend your holder/device for a better viewing position. It tilts approx. 15 degrees, swivels 360 degrees and extends 1 inch/ 2.54 cm. The Base plate has AMPS hole pattern and the face plate has several hole patterns including AMPS to accommodate most holders, cradles, mounts and car kits.
SKU: PRO-215500 Mfgr Part#: 215500
|
|
|
ProClip USA
Quick Release Dock W/ 15 mm Release TaB
The ProClip Quick Release Dock works with any ProClip device holder with a Tilt-Swivel. Easily remove a holder from its mounting location without the use of tools. - 15 mm Extended release tab for easy device removal - Allows you to switch device holders without changing the mount - Fits all ProClip Device Holders with Tilt-Swivel or male adapter block
SKU: PRO-215699 Mfgr Part#: 215699
|
|
|
ProClip USA
PEDESTAL HEAD 45DEG ANGLE
45 degree Angled Top part to mount a device holder onto. Fits all ProClip pedestals. The top has four holes for mounting onto the top part of a Pedestal Mount. It has dual AMPS-holes for mounting of holder for unit.
SKU: PRO-215570 Mfgr Part#: 215570
|
|
|
|
ProClip USA
Backer Plate - ABS with 5mm Holes
PEDESTAL MOUNT BACK PLATE WITH 5MM THREADED HOLES
SKU: PRO-215798 Mfgr Part#: 215798
|
|
|
ProClip USA
Cable Retention Add-On w Retentn Screw
Cable Retention Add-On with Retention Screw
SKU: PRO-241711 Mfgr Part#: 241711
|
|
|
|
ProClip USA
Cable Retention Add-On with Retention Cl
Cable Retention Add-On with Retention Clip
SKU: PRO-241723 Mfgr Part#: 241723
|
|
|
|
ProClip USA
Pedestal Mount 4 inch, Lite-Duty
Pedestal Mount 4 inch, Lite-Duty, Adjustable
SKU: PRO-100400 Mfgr Part#: 100400
|
|
|
ProClip USA
Angled Top Part - 60 Degrees
Angled Top Part - 60 Degrees Angles the top part of the Pedestal Fits both Solid Core and Hollow Core Pedestals Dual AMPS-hole patterns for mounting of a device holder
SKU: PRO-215571 Mfgr Part#: 215571
|
|
|
|
ProClip USA
VESA Adapter Plate with Tilt-Swivel
VESA Adapter Plate with Tilt-Swivel
SKU: PRO-240902 Mfgr Part#: 240902
|
|
|
|
ProClip USA
MOUNT PLATE VESA 75 100MM INSET
The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
SKU: PRO-215659 Mfgr Part#: 215659
|
|
|
|
ProClip USA
ProClip AMPS Vibration Damper
AMPS Vibration Damper M4 Threaded Mount Holes Reduces Vibration and Shock Silicone Rubber - 60 Shore Firmness Include M4 Fastner Pack (100223)
SKU: PRO-216274 Mfgr Part#: 216274
|
|
|
|
ProClip USA
AMPS Adapter Plate for DTG Power Carts
AMPS Adapter Plate for DTG Power Carts
SKU: PRO-241911 Mfgr Part#: 241911
|
|
|
|
ProClip USA
ModTek Hard Case Hand Strap
Hand Strap for ModTek Hard Case Attach Opposite from USB-C Port
SKU: PRO-102807 Mfgr Part#: 102807
|
|
|
ProClip USA
PEDESTAL MOUNT ROUND MOUNTING PLATE 4 IN
This Pedestal Mount Round Mounting Plate creates an extra sturdy and secure mounting platform that can be used in aircrafts, boats and a variety of vehicles e.g. personal vehicles, commercial vehicles, emergency vehicles, police vehicles, trucks, tractors, fork lifts and RVs. Additionally, the Pedestal Mount Extension Rod can be used with mounts in retail stores, kiosks, gyms, conference rooms, trade shows etc.
SKU: PRO-215522 Mfgr Part#: 215522
|
|
|
|
ProClip USA
Proclip Quick Release Dock 40mm Lever
Quick Release Dock, 45 mm QUICK RELEASE, NON-CHARGING
SKU: PRO-241315 Mfgr Part#: 241315
|
|
|
|
ProClip USA
ProClip 2.25" Ball to AMPS Plate
2.25" Ball to AMPS Plate
SKU: PRO-100227 Mfgr Part#: 100227
|
|
|
|
ProClip USA
Seat Rail Mount Flexible Arm AMPS Plate
Seat Rail Mount - Aluminum Arm with Flexible Top
SKU: PRO-100235 Mfgr Part#: 100235
|
|
|
|
ProClip USA
Standard Speed Clip Kit
Standard Speed Clip Kit w/Standard release tab for a cleaner look when installed.Allows you to easily remove device holders Fits all ProClip Device Holders. Kit Includes 1 male and 1 female Speed Clip
SKU: PRO-241319 Mfgr Part#: 241319
|
|
|
|
ProClip USA
Hand Strap for ProClip Products (Long)
Hand Strap for ProClip Products (Long)
SKU: PRO-710882 Mfgr Part#: 710882
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 2IN
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215766 Mfgr Part#: 215766
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY OFFSET 2IN
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215767 Mfgr Part#: 215767
|
|
|
|
ProClip USA
ProCLip Print Mount Plate Honeywell RP4F
Printer Mount Plate with Battery Access for Honeywell RP4f
SKU: PRO-216231 Mfgr Part#: 216231
|
|
|
|
ProClip USA
MEDIUM ADJUSTABLE HOLDER W/ TILT SWIVEL
MEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-1 Inner Groove width: 6 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
SKU: PRO-246804 Mfgr Part#: 246804
|
|
|
|
ProClip USA
ProClip Medium Adjustable Phone Holder
MEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-3 Inner Groove width: 12 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
SKU: PRO-246806 Mfgr Part#: 246806
|
|
|
|
ProClip USA
Adjustable Phone Holder
Adjustable Phone Holder - Device thickness: 6-10 mm (0.24-0.39 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246827 Mfgr Part#: 246827
|
|
|
|
ProClip USA
Large Adjustable ProClip Holder T3
Large Adjustable ProClip Holder T3 - Device thickness: 12-16 mm (0.47-0.62 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246831 Mfgr Part#: 246831
|
|
|
|
ProClip USA
ProClip Medium Adjustable Holder
Medium Universal Adjustable ProClip Holder
SKU: PRO-711042 Mfgr Part#: 711042
|
|
