|
Description |
Price
(USD)
|
Availability
|
|
ProClip USA
CENTER DASH MOUNT FREIGHTLINER M2
CENTER DASH MOUNT FREIGHTLINER M2. ONLY for the Flat Dash style.
SKU: PRO-853337 Mfgr Part#: 853337
|
|
|
|
ProClip USA
Dash Mnt INTL Lone/Prostar 2008 - 2017
PROCLIP ANGLED MOUNT - International Lonestar/Prostar, 2008 - 2017
SKU: PRO-854505 Mfgr Part#: 854505
|
|
|
ProClip USA
ProClip 5V/3A Cig Plug to 6-Pin Molex
CIGARETTE LIGHTER PLUG WITH 6 PIN MOLEX CONNECTOR (24/12V TO 5V to 3A)
SKU: PRO-941020 Mfgr Part#: 941020
|
|
|
ProClip USA
UNIVERSAL MOUNT 5 INCH
This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 5 inches and can be attached to any flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
SKU: PRO-202016 Mfgr Part#: 202016
|
|
|
|
ProClip USA
AJUSTABLE HOLDER FOR 8-13 mm CASE
Adjustable Phone Holder for Rugged Cases - Device thickness: 8-13 mm (0.31-0.51 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246817 Mfgr Part#: 246817
|
|
|
|
ProClip USA
Large Adjustable ProClip Holder T2
Large Adjustable ProClip Holder T2 - Device thickness: 9-13 mm (0.35-0.51 inches) - Device thickness: 9-13 mm (0.35-0.51 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246830 Mfgr Part#: 246830
|
|
|
|
ProClip USA
AJUSTABLE HOLDER FOR 11-14 mm CASE
Adjustable Phone Holder for Rugged Cases - Device thickness: 11-14 mm (0.43-0.55 inches) - Device thickness: 11-14 mm (0.43-0.55 inches). This Large Adjustable Universal Holder is designed to hold devices used with a rugged case. You make a one time easy adjustment to have the best fit for your device. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246850 Mfgr Part#: 246850
|
|
|
|
ProClip USA
Hard-Wired Power Supply Dual USB-A
Hardwire Power Supply with Dual USB Ports. Input 12/24V to 2 Pin Molex Port Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A No power cables included
SKU: PRO-945011 Mfgr Part#: 945011
|
|
|
|
ProClip USA
CENTER DASH MOUNT FORD E SERIES
CENTER DASH MOUNT FORD E SERIES. Visit link below to see complete list of vehicle compatibility. https://www.proclipusa.com/product/854310-proclip-center-mount?sSearch=8 54310
SKU: PRO-854310 Mfgr Part#: 854310
|
|
|
|
ProClip USA
DASH MOUNT FORD TOURENEO/TRANSIT
Ford Transit Center Dash Mount 2014 - 2019. Consider how the device, or horizontal position, will fit the location and could interfere with other vehicle functions. To see complete list of vehicle compatibility, please visit this link: https://www.proclipusa.com/product/854857-proclip-center-mount?sSearch=8 54857
SKU: PRO-854857 Mfgr Part#: 854857
|
|
|
|
ProClip USA
ProClip Toyota Prius 2016-20xx
PROCLIP CENTER MOUNT - Toyota Prius 2016 - 20xx
SKU: PRO-855200 Mfgr Part#: 855200
|
|
|
|
ProClip USA
ProClip Center Mount Ford Transit 2020+
PROCLIP CENTER MOUNT - Ford Transit 2020 - 20xx Ford Tourneo Custom 2019 - 20xx
SKU: PRO-855404 Mfgr Part#: 855404
|
|
|
|
ProClip USA
Aluminum AMPS Plate for Crown Pipe Clamp
Aluminum AMPS Adapter Plate for Crown Forklift Pipe Mount
SKU: PRO-241798 Mfgr Part#: 241798
|
|
|
|
ProClip USA
UNIVERSAL PEDESTAL 6 INCH
This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 6.5 inches/ 165 mm and can be attached to any flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
SKU: PRO-202010 Mfgr Part#: 202010
|
|
|
|
ProClip USA
Short Extension Plate
Short Extension Plate
SKU: PRO-216076 Mfgr Part#: 216076
|
|
|
|
ProClip USA
CLAMP MOUNTw/PLATE
For installation of devices on pipes and stays, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 50x42 mm with pre-drilled AMPS-holes. The mount fits round and oblong bars 0.875 in. to 1.25 in. (22.22 mm to 31.75 mm)
SKU: PRO-215794 Mfgr Part#: 215794
|
|
|
ProClip USA
ProClip Non-Charge Cradle Zebra TC21/26
Non-Charging Cradle Zebra TC21 TC26 in Rugged Boot
SKU: PRO-711338 Mfgr Part#: 711338
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 6IN
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215762 Mfgr Part#: 215762
|
|
|
|
ProClip USA
ProClip Wall Power Supply 12V Molex
AC Wall Power Supply with 6-Pin Molex Adapter 110-240V 1.3A AC Input 12V 3A DC Output Interchangeable Wall Plugs 5 Foot Cable
SKU: PRO-216353 Mfgr Part#: 216353
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY SQUARE BASE
This Square AMPS Base adds a mounting platform to a Mount Extension Rod. It offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
SKU: PRO-215850 Mfgr Part#: 215850
|
|
|
|
ProClip USA
ProClip Power Supply, Cabling and Fuse
HARDWIRE POWER SUPPLY 24/12V TO 5V, 2A (IP841 charging box with Molex to Molex Pig Tail and 2 Pin Molex cable to fixed power source with red fuse holder)
SKU: PRO-241463 Mfgr Part#: 241463
|
|
|
|
ProClip USA
Non-Charging Cradle Zebra TC73 / TC78
Non-Charging Cradle Zebra TC73 / TC78
SKU: PRO-711311 Mfgr Part#: 711311
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY ROUND BASE 5MM
This Round base Mount AMPS Base adds a mounting platform to a Mount Extension Rod. It has holes which accomodate 5mm bolts and offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
SKU: PRO-215849 Mfgr Part#: 215849
|
|
|
|
ProClip USA
ET4x - Spring Lock Module, No Boot
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
SKU: PRO-216313 Mfgr Part#: 216313
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 4 INCH
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215846 Mfgr Part#: 215846
|
|
|
|
ProClip USA
MOUNT HEAVYDUTY EXTENSION 8 INCH
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215847 Mfgr Part#: 215847
|
|
|
|
ProClip USA
ProClip AMPS & VESA75 Vibration Damper
VESA 75 and AMPS Vibration Damper M4 Threaded Mount Holes Reduces Vibration and Shock Silicone Rubber - 60 Shore Firmness Include M4 Fastner Pack (100223)
SKU: PRO-216275 Mfgr Part#: 216275
|
|
|
|
ProClip USA
Magnet Set (2) for ProClip Tough Sleeve
Magnet Set (2 pcs) for attachment to back of Sleeve.
SKU: PRO-710880 Mfgr Part#: 710880
|
|
|
|
ProClip USA
5" Pedestal Mount with Steel AMPS Plates
5 Inch Universal Pedestal Mount Includes 2 Steel 20mm Ball AMPS Plates
SKU: PRO-100326 Mfgr Part#: 100326
|
|
|
|
ProClip USA
Non-Charging Cradle Honeywell CT30 XP
Non-Charging Cradle for Honeywell CT30 XP
SKU: PRO-711334 Mfgr Part#: 711334
|
|
