|
Description |
Price
(USD)
|
Availability
|
|
|
Bogen
UNIVERSAL TELEPHONE INTERFACESINGLE ZONE
Universal Telephone Paging Interface (+20 CU), Single-Zone
SKU: BOG-UTI1 Mfgr Part#: UTI1
|
|
|
|
Bogen
LINE INPUT-600 OHMS WITH MATCHING TRANSF
matches transformers that allow proper connections between high (10k-ohm) and low (600-ohm) inputs and outputs
SKU: BOG-WMT1A Mfgr Part#: WMT1A
|
|
|
|
Bogen
NYQUIST IP PAGING SYSTEM - VoIP WALL BAF
NYQUIST IP PAGING SYSTEM - VoIP WALL BAFFLE SPEAKER GEN3,
SKU: BOG-NQS1810WTG3 Mfgr Part#: NQ-S1810WT-G3
|
|
|
|
Bogen
CEILING BAFFLE FOR 8" SPEAKERSROUND STEE
Bogen Ceiling Speaker Grille protects and conceal recessed 8" ceiling speakers
SKU: BOG-PG8W Mfgr Part#: PG8W
|
|
|
|
Bogen
GRILL, ROUND STEEL BRIGHTWHITE
This bright-white enamel, round steele grille is designed to protect and conceal recessed 8" ceiling speakers. Mounting hardware is included.
SKU: BOG-PG8U Mfgr Part#: PG8U
|
|
|
|
Bogen
TRANSFORMER,4,2,1,1/2,1/4,1/8WATT TAPS
Audio Speaker Transformer for 70V Paging Systems; Power Taps: 4, 2, 1, 1/2, 1/4, 1/8 watts
SKU: BOG-T725 Mfgr Part#: T725
|
|
|
|
Bogen
ROUND STEEL GRILLE, WHITE WITHHIDDEN STU
The PG8W is a metal grille designed to protect and conceal recessed 8" ceiling speakers. Color is off-white enamel.
SKU: BOG-SG8W Mfgr Part#: SG8W
|
|
|
|
Bogen
TRANSFORMER:10,5,2-1/2,1-1/4,5/8 WATT AM
The T72510 is a speaker-matching transformer that allows an 8-ohm speaker to be connected to 70V or 25V amplifier outputs. An 8-ohm secondary connects to the speaker and the multi-tap primary connects to the 70V or 25V amplifier output. It can be tapped at 10, 5, 2-1/2, 1-1/4, and 5/8 watts. All wires are easily accessible.
SKU: BOG-T72510 Mfgr Part#: T72510
|
|
|
|
Bogen
10' CABLE KIT
10-foot long cable kit to be used either as a main suspension drop cable or as a safety cable. Included in the kit is a 10-foot long cable with fixed loop, cable clamp and instruction sheet.
SKU: BOG-CK10 Mfgr Part#: CK10
|
|
|
|
Bogen
10 FOOT CABLE & CLAMP - BLACK
Cable Kit in black with 10' long cable with fixed loop, a cable clamp, an eyebolt, and a spacer nut
SKU: BOG-CK10B Mfgr Part#: CK10B
|
|
|
|
Bogen
WHT 10FT CABLE & CLAMP
10-foot long cable kit to be used either as a main suspension drop cable or as a safety cable. Included in the kit is a 10-foot long cable with fixed loop, cable clamp and instruction sheet.
SKU: BOG-CK10W Mfgr Part#: CK10W
|
|
|
|
Bogen
CALL-IN SWITCH MOMENTARY CLOSURE
Momentary-push switch designed for use with PI/SI35A intercom systems in conjuction with the SCR25A. When pushed and released once, a signal is sent to the MCP35A via the SCR25A call-in module to annunciate the call-in on the SBA225. The room must be equipped with a 25-volt speaker.
SKU: BOG-CA17 Mfgr Part#: CA17
|
|
|
|
Bogen
GROUND STAKE, MULCH (FOR NEAR BRAND SPEA
GROUND STAKE, MULCH (FOR NEAR BRAND SPEAKERS)
SKU: BOG-GS4 Mfgr Part#: GS4
|
|
|
|
Bogen
PASSIVE VOLUME CONTROL FOR AMPLIFIED SPE
Continuously variable volume control; designed to control up to 150 self amplified speakers
SKU: BOG-SLC Mfgr Part#: SLC
|
|
|
|
Bogen
A-SERIES COVER BOOT - BLACK FOUR PER PAC
This terminal block electrical cover for A-Series Speakers (4-pack) will provide extra protection from the elements for electrical connections. This cover has a black finish with a terminable cable exit sprout.
SKU: BOG-ASTB4 Mfgr Part#: ASTB4
|
|
|
|
Bogen
CALL-IN SWITCH, 2-POSITION
Call-In Switch with SCR latch circuit
SKU: BOG-CA10A Mfgr Part#: CA10A
|
|
|
|
Bogen
REMOTE VOLUME CONTROL FOR GS AMPLIFIERS
The GSVRC is a remote volume control designed for controlling volume in systems with a Gold Seal series amplifier. This device can be mounted up to 1000' away from the amplifier in a single gang electrical box.
SKU: BOG-GSRVC Mfgr Part#: GSRVC
|
|
|
|
Bogen
GRILL for SPEAKER HFCS1
GRILL for SPEAKER HFCS1
SKU: BOG-23717103 Mfgr Part#: 23-7171-03
|
|
|
|
Bogen
INSERTION TOOL
The TL156 is a plastic tool used to install the connector kits onto the PI135A intercom. The insertion tool is included with every connector kit, this is simply a replacement.
SKU: BOG-TL156 Mfgr Part#: TL156
|
|
|
|
Bogen
CABLE FOR MHH/25 FEET 25' CABLE, FEMALE
This XLR Interconnect Cable is a low-loss mic cable with a female XLR connector at one end, and bare stripped and tinned wires at the other. Ideal for custom installations with Bogen handheld microphones.
SKU: BOG-MAC Mfgr Part#: MAC
|
|
|
|
Bogen
CALL-IN SWITCH, 3-POSITION WITH PRIVACY
3-position switch providing annunciator call and privacy control. Designed for use with the PI35A, SI35A and MultiGraphic Series 115B/2223/2233 systems. SCR holding circuits actuate the annunciator signal and LEDs in Bogen's SBA-Series room selector panels. Provide momentary press-to-call.
SKU: BOG-CA11A Mfgr Part#: CA11A
|
|
|
|
Bogen
MICROPHONE CABLE 25' FEMALE XLR TO MALE
25' male XLR to female XLR microphone cable. DS3 2-conductor plus shield.
SKU: BOG-XLR25 Mfgr Part#: XLR25
|
|
|
|
Bogen
CONNECTOR KIT (30 PCS), 18 GA
18-Gauge connectors designed for PI35A/SI35A intercom systems. (30 pieces).
SKU: BOG-2518 Mfgr Part#: 2518
|
|
|
|
Bogen
CONNECTOR KIT 20 GAUGE 30 PCS
CONNECTOR KIT 20 GAUGE 30 PCS
SKU: BOG-2520 Mfgr Part#: 2520
|
|
|
|
Bogen
CONNECTOR KIT (30 PCS) 22GA
22-Gauge connectors designed for PI35A/SI35A intercom systems. (30 pieces).
SKU: BOG-2522 Mfgr Part#: 2522
|
|
|
|
Bogen
CABLE, STEREO RCA TO RCA 6ft
Universal 6 ft. stereo RCA to RCA cable (music/input sources)
SKU: BOG-SRCA6 Mfgr Part#: SRCA6
|
|
|
|
Bogen
SQUARE GRILL HD 8" SPKR
Ceiling grille for 13" speakers (semi-glass white enamel). The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker.
SKU: BOG-SGHD8 Mfgr Part#: SGHD8
|
|
|
|
Bogen
Nyquist Digital Call Switch Gen2
Nyquist Digital Call Switch Gen2
SKU: BOG-NQE7020G2 Mfgr Part#: NQ-E7020-G2
|
|
|
|
Bogen
Nyquist Distributed Audio Transformer
Nyquist Distributed Audio Transformer Module, 40W
SKU: BOG-NQGAXMR1 Mfgr Part#: NQ-GAXMR1
|
|
|
|
Bogen
MATCHING XFORM, ADAPTS TO SPKR
Matching inputs from or outputs to a 600-ohms line; adapt speaker-level signals (25V/70V systems)
SKU: BOG-WMT1AS Mfgr Part#: WMT1AS
|
|
